1. Cartridge storage:

Keep the cartridge at room temperature environment, avoiding sunlight, strong light and heat storage. In front of the ink cartridges are not installed on computer use, not to tear cartridge packaging and pore seal. The cartridge after opening, as soon as it was installed on the printer, it may cause a cartridge leak ink or spray no color. To get the best print results, please use within three months after installing ink cartridges.

2. installation and replacement of cartridges:

When Retractable Banner printing process, the ink light flashes, it means that the ink is running out, still can print continuously, until the light stop flashing, the printer stops Retractable Banner printing, you should immediately replace the print cartridge. When the ink cartridge is installed, you must follow the guidelines on your printer manual, remove the stoma seals, but not free to remove other seals, otherwise the ink will leak.

Each time you install a new print cartridge, generally clean the print head 3-5 (Please clean the print heads at least once). When any of the ink cartridges when there is no ink or not installed, even if the other cartridges have ink, the printer cannot work. New ink cartridge once disembarked, before replacing the ink cartridge must not remove. Unless you want to replace the ink cartridge, do not open the print cartridge protection clamp, otherwise the ink cartridge may not be able to use.

When the Retractable Banner Stand printer is not working his hand into the printer or touch the ink cartridges. When you are in doubt on the quality of ink cartridges, and is not used when the ink was removed from the printer, bottom inkjet please using Scotch tapes, with a plastic bag with good sealing, to your place of purchase dealer, quality of detection and evaluation of cartridges for manufacturers. Expiration date do not use ink cartridges.

3. cartridge life-related factors:

Using a color inkjet cartridge (with the body of the cartridge) process, to note that the red, yellow and blue shades of balanced use, don't just focus one color picture Retractable Banner Stand printing, because as long as the exhaustion of a color cartridge, even if another color is not exhausted, inkjet cartridges cannot be used

Generally higher print resolution of the picture, the more ink. The ink light consumes less, bright red or blue composite synthesis requires more than a basic color and needs to consume more ink

4. the factors affecting the print pictures:

Quality of the cartridge

Media choice: different brands, different paper prints of different texture (made from paper as white picture color is bright)

Clarity of the original picture

Selected when you print output resolution

Using different software print pictures, different color saturation

Five solutions to common problems, print process:

There are several common problems in the Retractable Banner Stand printing process: problem-solving method of a color sprayed out (printed picture color deficiency) cleaning print head print quality (print picture appears dimmed, there are cracks or missing line) cleaned the print head

Ink cartridge leak while printing ink change ink cartridge

Above problem in the Retractable Banner Stands printing process, first performing a self-test, if the self-test pattern is out of line, you will need to clean the print head, under normal circumstances, when you self by cleaning the print head, pattern, there is no default line.

If after cleaning and self-test pattern remains out of line, please repeat 4-5 times, under normal circumstances, self test pattern line will reduce the shortage, this proves that cleaned effectively, should insist on cleaning. After a continuous cleaning, still does not meet the normal print, indicates that the ink in the cartridge has little or no, need to replace the print cartridge.

Installed new ink cartridges, sometimes they will have self out of line or a color spray does not, at this point, not to be judged as the print head clogging, mostly caused due to bumps and upside down storage in transit, the print head for cleaning. Under normal circumstances, if the self-test pattern when there are a small number of short line, if it does not print-quality pictures (just print the file), to print properly, do not need to clean the print head.

• Next >